برچسب: Process

  • Printmaking Hacks to Transform Cleanup Into Part of the Creative Process

    Printmaking Hacks to Transform Cleanup Into Part of the Creative Process


    Printmaking is one of the most engaging art processes for students, but it can quickly turn your classroom into a disaster zone. Inky rollers, murky water, and sticky plates can make cleanup overwhelming. Plus, it can require alternative materials that may be new to your classroom. With smart and efficient strategies, you can keep your printmaking tools in top shape while teaching students responsibility.

    Gain time-saving hacks, space-saving solutions, and teacher-tested tricks to make printmaking in the classroom easier than ever!

    students printmaking

    Smart Flow Stations

    Instead of having materials scattered across the room, try stations. This helps students move through the printmaking process with more independence. Give a clearly defined purpose and provide anchor charts to remind students about the purpose, steps, and materials for each station. Try breaking your stations down into the following: Inking, Printing, Drying, and Cleaning.

    Here are common materials to include at each station:

    • Inking: Inks, brayers, palettes, wipes, and paper towels.
    • Printing: Printing press, barens, or large spoons, newsprint, printing paper, and scrap paper.
    • Drying: Tables, drying racks, or clothesline and pins.
    • Cleaning: Sponges, buckets, soap, wipes, paper towels, and drying cloths.

    Space-Saving Storage Hacks

    No matter how large or small your teaching space is, printmaking storage requires extra care. Supplies like brayers, printing plates, and rags can pile up fast. To avoid clutter, think in terms of visibility, accessibility, and vertical space.

    Explore these three creative storage ideas:

    1. Brayers
      Brayers are often bulky to store in containers. Glue magnets to the handle and attach them to magnetic strips, or if there are holes in the handle, use small nails or adhesive hooks to utilize wall space.
    2. Printing Plates
      Store a class’s printing plates in a large accordion folder or collect each table’s printing plates in labeled pizza boxes. Ask your local pizzeria for box donations! Plus, they are easy to stack and will keep the plates clean and organized.
    3. Rags
      Dry wet rags and cloths on a retractable clothesline. Once dry, store in an over-the-door shoe or pocket organizer.

    Budget Drying Racks

    Drying prints is one of the biggest space challenges in a classroom because students are often rapidly printing multiples. If you don’t have access to a traditional drying rack, you’ll need to get creative. Immediately hang wet prints up using a clothesline and clothespins. Ask local grocery stores or bakeries for donations of rolling baking racks to store prints on. Tape newspapers under tables or desks and gently place prints under the table. If you have absolutely no space, send prints home the same day. Protect damp ink with “print sandwiches” using newspaper and cardboard.

    drying rack with art

    Team Effort Cleanup

    Are you the last one in the room scrubbing brayers and wiping tables? Cleaning up after a printmaking lesson takes time, but it doesn’t have to all fall on you. Creating a job system gives students ownership and accountability over materials and teaches them to respect the tools they use. Make students feel “official” with fun laminated name tags that have their cleanup role on them!

    Try these fun cleanup roles:

    • Brayer Boss: Cleans and returns brayers.
    • Plate Patrol: Wipes down and stacks plates, palettes, and trays.
    • Ink Inspector: Checks for inky fingers before anyone leaves and distributes wipes accordingly.
    • Table Technician: Ensures all tables are clean and dry.
    • Paper Picker: Picks up and recycles all paper scraps.
    • Print Pro: Organizes drying racks or hanging prints.

    No Sink Printmaking

    It’s easy to stick with drawing if you don’t have sink access. However, with some water-saving tricks and a bit of planning, you can still bring the magic of printmaking to your students! The goal is to remove most of the ink before rinsing and to conserve water. Grab a bunch of cheap spray bottles and pre-fill them with clean and soapy water, and you’re ready to go!

    mini spray bottle

    Follow these easy steps to make cleanup without a sink a breeze:

    1. Cover tables with newsprint or disposable tablecloths and toss them at the end of the period.
    2. Roll off excess ink from the brayers onto scrap paper.
    3. Spray soapy water on the brayers and roll onto a damp sponge or rag.
    4. Wipe the brayers down with a dry cloth and store.
    5. Use paper plates for palettes and throw them away at the end of the period.
    6. Provide wet wipes or DIY ones to clean hands.
    7. Keep shop towels on hand for emergency cleanup!

    Leftover Ink Ideas

    Leftover ink doesn’t have to go straight into the trash. In fact, it can lead to some of the most creative moments in your printmaking unit. About 5-10 minutes before it’s time to clean up, walk around and see if you notice leftover ink. Turn this opportunity into a mini challenge to foster sustainability! Prompt students to create a print using only what’s left on the brayer and plate.

    Here are four ways to use leftover ink:

    1. Pull ghost prints from the same plate.
    2. Save roll-off sheets for future collage or layering.
    3. Play with color mixing and gradations.
    4. Experiment with textured scraps of paper.

    printing plate, ink jar, and brayer

    Printmaking is truly all about the creative process, so why not invite students to extend the experience into cleanup? When you provide students with structure and empower them with responsibility, cleanup will transform from a chore into part of the learning. The key to success is preparing your hacks ahead of time and ensuring all systems are in place with clear expectations before students crack the printing ink open. These small routines build lasting habits and teach students that caring for their creative space is just as important as creating within it.

    What printmaking hack would you add to the list above?

    How do you incorporate cleaning into part of your students’ artistic process?

    To chat about printmaking with other art teachers, join us in The Art of Ed Community!

    Magazine articles and podcasts are opinions of professional education contributors and do not necessarily represent the position of the Art of Education University (AOEU) or its academic offerings. Contributors use terms in the way they are most often talked about in the scope of their educational experiences.



    Source link

  • Mixed-Media Process Art Weaving Invitation

    Mixed-Media Process Art Weaving Invitation


    It’s been a while since I’ve written about my open-studio library events. This mixed-media process art weaving invitation that I set out for a multi-age group was more prep than I usually do, but it was worth it and as successful as I had hoped!

    Child is at a table with lots of different textures and materials to use with a cardboard weaving loom.

    I will admit I was a little ambiguous about how this would go. I really needed to trust myself and trust that children would figure things out on their own. Since this was a process art experience, I didn’t set out an example or teach the weaving technique in any way. I hoped that the different textures and materials would spark interest, and I included some familiar materials like tempera paint sticks and dot labels for children to turn to if they didn’t feel quite ready to jump into something new.

    Table full of different materials and textures to use in weaving with a cardboard loom.

    [ I am a participant in affiliate programs designed to provide a means for bloggers to earn small fees at no cost to you by linking to Amazon.com and affiliated sites. ]

    I can’t wait to share what happened, but first, here is a materials list. These are just what I used because I had everything in my basement, but use whatever you have!!

    Materials for process art weaving invitation:

    ~ Cardboard (approx. 8×10 inch pieces but doesn’t have to be exact)

    ~ Fiskars Power-cut scissors or Zip-Snip to cut the cardboard

    ~ Good scissors for cutting up the materials

    ~ Hole punches

    ~ Soft textiles like yarn, chunky chenille yarn, ribbon, ricrac, felt, fabric strips

    ~ Recyclables to cut into strips like corrugated cardboard, thin foam, paint samples, honeycomb paper

    ~ I collected some twigs from outside, too. If it was fall or summer I would have collected leaves and/or flowers, too.

    ~ Dot labels, tempera sticks, gold tempera paint, thin masking tape

    A stack of cardboard looms on a table.

    My prep and set-up process:

    1. First I cut up the cardboard. They are not all the same size, I basically just cut down lots of boxes so whatever was easiest to make some rectangles from each box.

    2. I used a ruler to make even marks on either end of the cardboard pieces and then snipped with scissors.

    Wrapping yarn to create the warp on cardboard weaving looms.

    3. I didn’t make these looms in the typical way, like with a warp that could be removed. These are just quick-and-dirty, meant to give children a feel for the process but not actually take it off the loom. This also makes them much easier to put together. We just wrapped yarn around the cardboard and taped the ends on the backs. My superstar husband helped me. This was still a heavy prep project which I don’t normally do for these events. But I wanted to try it, even though it took some time.

    A pile of cardboard weaving looms, some have a yarn warp and some are empty.

    I made about 60 looms. I typically have about 45 children coming through the space within a 2-hour timespan, so I wanted to make sure I had enough in case some kids wanted to make more than one.

    A table set up with cardboard looms and weaving materials ready for children to come and use.
    A table set up with cardboard looms and weaving materials ready for children to come and use.

    4. I cut up all the different materials into strips that were a little longer than the width of the looms. I cut the felt into shapes, thinking that maybe they could be painted on or used later for something else.

    A table set up with cardboard looms and weaving materials ready for children to come and use.

    5. I set out the materials in lots of different baskets and divided trays (many of these come from Ikea). I know it looks like a lot so when I say “Less is More” it feels like I’m joking, but what I mean is that the low baskets and trays make it so that I can’t put a lot out at once. Children don’t want to sift through a big bin of materials, it’s much easier to have just 20 pieces on a flat tray. I have extra nearby to replenish.

    Young child weaving on a cardboard loom with different yarns.

    Notes on how children approached the weaving table:

    Process art is all about letting children guide their own experiences with materials, but sometimes we have to really practice taking ourselves out of the equation. At first, children wandered over to the weaving table and just walked around touching some materials and then moving away. Maybe they went to the liquid watercolor table, a familiar medium, or the maker table, also filled with familiar materials. Some parents came to the table very excited, exclaiming “Ohhhh, weaving!” They attempted to teach their child the technique. Some kids sat with their parents. But mostly, I noticed that it was the children who attempted weaving on their own, or who already had some knowledge about weaving and didn’t have a parent over their shoulder that stayed engaged the longest.

    Child embellishing their cardboard loom weaving with yellow dot stickers.

    This didn’t surprise me. My partner, Shannon, and I have built our whole approach at The Creativity Project around the very idea that children bring their creativity, and the materials do the teaching. Adults just need to step back and be there as support if needed. Children who have the freedom to move on their own and choose how to use materials are the ones who get into flow and build that creative confidence.

    Child holding up her cardboard loom weaving with one pink piece of thick, chenille yarn.

    I loved observing and documenting all the different ways that children made their weaving. Some were minimalist, some were maximalist. Some were orderly and repetitive, others were carefree and experimental. There was no right or wrong way to approach the materials, which is the beauty of open-ended tables like this.

    Child holding up their finished cardboard loom weaving that they have embellished with gold paint.

    I was really proud of parents for letting their children struggle and persevere. I heard a few, “I can’t do it” from children, and then “Try again” from their adult. I’ve been doing these open studios for a year and a half now, and parents have grown and learned along with their children. They have noticed how much more joy their child gets from a creative exploration when the adult doesn’t instruct or navigate the experience.

    Child holding up their cardboard loom weaving where they have used lots of different materials and textures, like yarn and ribbon and strips of corrugated cardboard.
    Child with an assortment of weaving materials at a table.

    I’m including this last photo because this child took some of the soft textiles and brought them to the painting table to make a toy for his dog. This is always what I hope might happen – when children take materials along with them to build on an idea. This could only happen in a setting where children are allowed to take risks and where they know that can try anything. It’s not too hard to create an environment like this. The part that takes the longest to learn is our part – the stepping back and not making it about us and our vision. Once we can learn this though, we realize that children are a thousand times more creative than we can ever hope to be.

    xo, Bar

    – – – – – – – – – – – – – – – – – – – –

    Did you like this post? Here are some more weaving ideas:

    Weaving with kids using a cardboard loom.
    Weaving with Kids using a Cardboard Loom
    Doodle weavings with a cardboard loom.
    Doodle Weavings
    Weaving with a cardboard loom using rainbow-dyed wool roving.
    Rainbow Dyed Wool Roving Weavings





    Source link